AIWorkJobs
Braintrust logoLeading AI LabListed on Braintrust

Analogue RF IC Designer for EM Simulation Tasks

Create evaluation tasks that ask a model to design and refine passive on-chip RF components against electrical and area targets. For each task, provide the specification, a reference layout, and a check that runs an EM…

Remote · Eligible in 8 countriesContract
Work arrangement
Remote
Eligibility
Eligible in 8 countries
Engagement
Contract
Compensation
$40–$100/hr
Specialty
Hardware & Embedded Systems
Experience
3–5 years

About the role

Create evaluation tasks that ask a model to design and refine passive on-chip RF components against electrical and area targets. For each task, provide the specification, a reference layout, and a check that runs an EM simulation and compares its results with the target. The work starts with five pilot tasks, followed by a review before the project scales. Applicants must be based in Europe, Canada, or the US.

What you would do

  • Write specifications for passive on-chip components, such as spiral inductors with target inductance, quality factor, and area.
  • Build a reference design that meets each component specification.
  • Create automated checks that re-simulate submitted layouts and compare the results with the specification.
  • Review and refine the initial set of five pilot tasks with the project team before scaling.

Requirements

  • Hands-on experience with RF IC design and passive component layout.
  • Experience laying out components such as spiral inductors, transformers, baluns, transmission lines, coupled resonators, or quadrature hybrids.
  • Ability to run EM simulations on personal layouts and interpret results such as S-parameters, inductance, and quality factor.
  • Experience working with GDS layouts and S-parameter files.
  • Python skills for scripting simulations and writing automated checks.
  • Based in Europe, Canada, or the United States.

Preferred qualifications

The source marks these as preferred, not required.

  • Experience with IHP SG13G2 or another open PDK; the test chip is a 24 GHz radar receiver front end on SG13G2.
  • Experience with KLayout, Palace, openEMS, ngspice, or scikit-rf.
  • Familiarity with the IIC-OSIC-TOOLS container.
  • Experience with commercial EM solvers such as Cadence EMX or Ansys HFSS.
  • SPICE simulation experience with RF blocks, such as a low noise amplifier.

Who should apply

RF IC designers with hands-on passive layout, EM simulation, and Python scripting experience will fit the core needs. Candidates in Europe, Canada, or the US who work with GDS layouts and S-parameter data are eligible.

How applying works on Braintrust

Create a Braintrust profile, complete the AI skills interview, then browse and accept tasks from the dashboard.

  1. Create and complete a Braintrust profile.
  2. Complete the AI skills interview used for expertise and pay-level matching.
  3. Browse the dashboard for available tasks.
  4. Accept a task and complete the work.

Typical timeline: A new member profile takes about 20 minutes.

Paid steps: Not stated by the source

Individual client projects can add their own interview, assessment, or identity check.

Process checked Nov 19, 2026. AIWorkJobs does not submit applications or charge a fee. Read the full Braintrust process and its official source on the Braintrust page.

Skills mentioned by the source

  • rfic
  • analog ic design
  • passive component layout
  • electromagnetic simulation
  • gds
  • s-parameters
  • python
  • ihp sg13g2
  • open pdk
  • klayout
  • palace
  • openems
  • ngspice
  • scikit-rf
  • cadence emx
  • ansys hfss

Specialty areas

Specialties come from the source platform’s category taxonomy and are used to filter the job index.

Listing reference: analogue-rf-ic-designer-for-em-simulation-tasks-18060. Source: Braintrust. If something here contradicts the source, the source controls. Report a correction.

Related roles

Other work on the index.

See more in this category

Handshake AI

Embedded Systems & RF Engineer - Canada

Use your background in embedded systems, firmware, digital signal processing, or RF and wireless design to assess AI-generated engineering content. You will write practical engineering scenarios, judge model responses, and give structured feedback. The ongoing, project-based work is part-time, with a flexible schedule and no minimum hour requirement, so you can fit it alongside your current role.

Location and eligibility
Remote · Eligibility not specified
Engagement type
Part-time
Compensation
$96/hr
  • embedded systems
  • embedded firmware
  • real-time systems
Hardware & Embedded SystemsView job

Mercor

Radio Frequency and Electromagnetic Engineering Expert

On a short-term project, you’ll use hands-on engineering experience to assess and solve challenging problems across RF systems, electromagnetics, antennas, propagation, and related applications. The work centers on reviewing designs, specifications, simulation results, and engineering data, then checking assumptions and proposed solutions against performance needs and project guidelines.

Location and eligibility
Remote · Eligibility not specified
Engagement type
Hourly
Compensation
$80–$95/hr
  • radio frequency engineering
  • electromagnetics
  • microwave engineering
Network & TelecommunicationsView job

Turing

CAD and Simulation Consultant

Develop CAD models and simulations for aerospace and electrical engineering projects.

Location and eligibility
Remote · Eligibility not specified
Engagement type
Contract
Compensation
Pay not listed
  • cad
  • simulation
  • process modelling
EngineeringView job

Turing · via Braintrust

Thermal & CFD Simulation Engineer

Build and validate simulation workflows for PCB assemblies and electronic systems, with a focus on temperature distribution, heat dissipation, airflow, and cooling performance. The contract runs for about 13 weeks, with possible extension. The project requires 40 hours per week and an early start. Selection includes an AI interview and a delivery-team interview.

Location and eligibility
Remote · Eligible in 9 countries
Engagement type
Contract
Compensation
$16/hr
  • cfd
  • thermal simulation
  • heat transfer
EngineeringView job