AIWorkJobs
Micro1 logomicro1Platform listing

Dimensional Metrology Quality Engineer

A customer project needs a Dimensional Metrology Quality Engineer to review inspection work and provide expert input for AI system training. You will assess 3D scan data against CAD models, check datum setups and GD&T…

Remote · Eligibility not specifiedContract
Work arrangement
Remote
Eligibility
Eligibility not specified
Engagement
Contract
Compensation
$50–$100/hr
Specialty
Quality Control & Inspection

About the role

A customer project needs a Dimensional Metrology Quality Engineer to review inspection work and provide expert input for AI system training. You will assess 3D scan data against CAD models, check datum setups and GD&T callouts, and help distinguish part defects from measurement setup artefacts. Prior AI experience is not required.

What you would do

  • Review and validate first-article inspection reports based on 3D scan data.
  • Compare scans with CAD models and investigate measurement deviations and their possible causes.
  • Set up, interpret, and document datum structures, profile callouts, and position callouts according to industry standards.
  • Apply CMM measurement methods and perform uncertainty analysis to assess dimensional integrity.
  • Determine whether deviations reflect actual part issues or stem from fixturing or alignment.
  • Provide clear written and verbal findings to support FAI sign-off decisions.
  • Share detailed metrology input that can inform AI system development.

Requirements

  • Bring relevant dimensional metrology expertise to the inspection and measurement work.
  • Be able to assess scan-to-CAD comparisons and identify potential sources of deviation.
  • Be able to evaluate datum setups, profile and position callouts, and measurement uncertainty.
  • No prior AI experience is required.

Preferred qualifications

The source marks these as preferred, not required.

  • Knowledge of GD&T and FAI processes in manufacturing or quality settings.
  • Experience with 3D scanning equipment and inspection software such as PolyWorks or GOM Inspect.
  • A strong background in CMM methods and uncertainty analysis.
  • Ability to read engineering drawings, CAD models, and technical specifications.
  • Experience creating or approving FAI reports, supported by practical metrology knowledge.
  • Strong written and verbal communication, with careful attention to explanatory detail.

Who should apply

Metrology professionals with experience in FAI, scan-to-CAD inspection, or dimensional measurement may be a fit. The work calls for sound judgment around GD&T, CMM results, and setup-related artefacts; AI experience is not needed.

How applying works on Micro1

Apply through the opportunities portal, complete an AI interview, verify your identity, and join the certified talent pool.

  1. Apply through the opportunities portal or accept a platform invitation.
  2. Complete the AI interview covering communication, reasoning, and role skills.
  3. Verify your government ID and sign the platform contract.
  4. Join the certified talent pool and wait for project matching.

Typical timeline: Micro1 does not publish a fixed interview length. Certification is typically reviewed within 30 days.

Paid steps: Not stated by the source

Certification does not guarantee a project placement.

Process checked Nov 19, 2026. AIWorkJobs does not submit applications or charge a fee. Read the full Micro1 process and its official source on the Micro1 page.

Skills mentioned by the source

  • GD&T and first-article inspection
  • 3D scanning and inspection software
  • CMM measurement and uncertainty analysis
  • Dimensional Metrology expertise

Specialty areas

Specialties come from the source platform’s category taxonomy and are used to filter the job index.

Listing reference: dimensional-metrology-quality-engineer-e51a86. Source: Micro1. If something here contradicts the source, the source controls. Report a correction.

Related roles

Other work on the index.

See more in this category

Handshake AI

Mechanical CAD Expert

Use your mechanical design experience to assess AI-generated work and help improve how models handle real engineering problems. You’ll create scenarios based on CAD, tolerancing, and manufacturing workflows, then review technical accuracy and provide written feedback. The work is project-based, part-time, remote, and has no set schedule or minimum hour requirement.

Location and eligibility
Remote · United States only
Engagement type
Part-time
Compensation
$75/hr
  • mechanical design
  • parametric cad
  • solidworks
EngineeringView job

SME Careers

Mechanical Engineer Quality Assurance Lead (QAL)

Lead quality reviews for mechanical engineering AI training projects, checking technical content and contributor work against project rubrics. You will assess calculations, engineering reasoning, units, standards, clarity, and safety, then guide trainers and QA reviewers through written feedback, onboarding, and project documentation. The role calls for mechanical engineering expertise, strong English communication, and experience with tools such as CAD or FEA/CAE.

Location and eligibility
Remote · United States only
Engagement type
Contract
Compensation
Up to $75/hr
  • mechanical engineering
  • quality assurance
  • engineering review
Quality Assurance & TestingView job

Mercor

Mechanical / CAD Engineer

Work remotely from the United States on mechanical design and CAD training for a leading AI lab. You’ll create and assess technical problems, reference models, and evaluation criteria that help improve AI performance. Cincinnatus LLC employs this part-time role on a W-2 basis and may place you with the lab as part of its extended workforce.

Location and eligibility
Remote · United States only
Engagement type
Part-time
Compensation
$60–$100/hr
  • mechanical design
  • cad
  • parametric cad
EngineeringView job

micro1

Electronics Assembly Quality Engineer

As an Electronics Assembly Quality Engineer, you’ll contribute manufacturing quality expertise to a customer project that trains AI systems. Work may focus on X-ray review of BGA, CGA, and LGA joints, reflow processes, solder defect analysis, or counterfeit component screening. You can bring experience in process quality or component authentication; prior AI experience is not required.

Location and eligibility
Remote · Eligibility not specified
Engagement type
Contract
Compensation
$60–$100/hr
  • X-ray inspection of area-array solder joints
  • Reflow process
  • Solder defect root cause
Quality Assurance & TestingView job